Sunday 30 October 2016

Scatter Terrain - Barriers



I've just recently finished painting up the first batch of six barriers sections for use in my Future Wars project (and of course anything else suitable) with a colour scheme and look I had decided upon a while ago.


There are another eighteen pieces all of which are from Ainsty Castings are fairly ubiquitous around these parts for use in modern/ultra modern games.

The photo's show a slightly lightened version of the paint job and as I was going for a bit used and abused look, this has fairly well worked out. A couple of lessons learnt in the process of producing these bits, not so much in the painting of the pieces but mainly in the production and use of the water slide transfers I made for the pieces.

I made the transfers from downloading images from the interweb and adjusted/edited in photoshop and printed the images out on white transfer paper (to get a sharper, brighter image) and duly sealed the prints prior to use. I cut the transfers to size prior to use but noticed that once soaked and applied, the transfers developed a slight white edge around them where the colouring had leached slightly.

Now once applied and a quick run of wash applied to the edges of the transfers actually looked pretty good and a bit more 'worn' appearing, so a good accident as it were, but unintentional, so I would like to experiment and find out how to avoid this. Probably printing the transfers out on clear sheets will be the likely cure, but we'll see how this works out for clarity.

Having done this first batch as a trial, I'll produce the rest of the two dozen pieces and aim for a uniform finish, but with a bit of experimentation on the transfer front.

4 comments:

Related Posts Plugin for WordPress, Blogger...